Numerical Control 3-6mm Wire Straightening And Cutting Machine
When the equipment is shipped to the user, transport the equipment parts to the installation site.Notes are as follows:
Should check whether the packaging box is intact, if you find a problem, contact our company in time.
Understand the net and gross weight of the equipment, select suitable lifting tools, and check whether the sling and lifting wire are intact.
When lifting, pay attention to the lifting position and center of gravity.
When lifting, it is strictly prohibited to place any part of the body under the lifting box, it is not prohibited to cross the lifting box over the head of the person.
The packing box shall not be tilted when lifting.
The tip of the shovel should exceed the appropriate distance from the center of gravity.
When unpacking, the top cover and four-side packaging must not fall into or squeeze into the packing box, so as to avoid damage to the machine parts or electrical parts.
After unpacking the equipment, first find the random documents, find out the equipment packing list, and check whether the parts, cables, data in each packing box are complete according to the packing list.
Before assembly of all equipment components, check the connection fasteners and line joints for loosening and damage.
| No. | Name | Parameters |
| 1 | Wire diameter | 3.0-6.0mm |
| 2 | Straightening length | 500-6000mm |
| 3 | Cutting error | ＜±1mm |
| 4 | Straightening speed | 80-100m/min |
| 5 | Straightness | ＜2mm/m |
| 6 | Material | Cold drawn wire,Galvanized wire |
| 7 | Voltage fluctuation range | ±10% |
| 8 | Voltage | 380V 50HZ |
Notes to the Numerical Control 3-6mm Wire Straightening And Cutting Machine:
1.The Numerical Control 3-6mm Wire Straightening And Cutting Machine user must do the operation and maintenance in strict accordance with the equipment manual.
2. Prepare the site for Numerical Control 3-6mm Wire Straightening And Cutting Machine installation must be according to the requirements
3. Supply power and gas according to the Numerical Control 3-6mm Wire Straightening And Cutting Machine.
4. Users are required to provide technical staff to assist in the installation, during installation, users need to install the Numerical Control 3-6mm Wire Straightening And Cutting Machine provided free of charge auxiliary equipment.
5. The Numerical Control 3-6mm Wire Straightening And Cutting Machine should be used in the workshop; the work environment will directly affect the performance and service life of the equipment.
Product Tags:
|
|
Numerical Control 3-6mm Plc Straight And Cut Wire Machine Images
|
